Delrin® AF stock shapes engineered for low friction and wear resistance
Extruded Delrin® AF rods, plates, and tubular bars designed to reduce friction, minimize wear, and support smooth, reliable motion in machined components.
.avif)
Why engineers choose Delrin® AF
Performance characteristics that make Delrin AF suitable for sliding, rotating, and wear-critical machined components.
Low-Friction Performance
Contains solid lubricants that significantly reduce friction, enabling smooth motion without external lubrication in many applications.
Excellent Wear Resistance
Designed for long service life in sliding and rotating parts, performs well in continuous motion and intermittent contact applications.
Dimensional Stability
Low moisture absorption and good stiffness help components maintain tight tolerances during machining and operation.
Good Mechanical Strength
Provides reliable strength and rigidity for load-bearing wear components such as bushings, guides, and bearing surfaces.
Excellent Machinability
Machines cleanly and predictably, allowing precise, cost-effective production of wear and motion components.
Why choose Delrin® AF from Quantum AEP
See how Quantum’s manufacturing approach supports stable machining and reliable performance.
Designed for Consistent Machining
Uniform PTFE dispersion and tightly controlled processing deliver predictable cutting behavior, reducing scrap, rework, and tool variability.
Stable Wear Performance You Can Rely On
Engineered for consistent friction and wear characteristics, helping extend component life in real-world applications.
Less Internal Stress, Better Part Accuracy
Our controlled extrusion and proprietary annealing minimize internal stress, reducing movement during machining and improving dimensional stability in service.
Built for Repeatability, Not Variability
Every batch is produced under controlled conditions to ensure consistent material behavior so your process stays stable over time.
Full Traceability and Process Transparency
Each production lot is supported by detailed processing and inspection records, giving you confidence in material quality and consistency.
Only Prime, Fully Traceable Raw Materials
We use high-quality acetal resin sourced directly from qualified suppliers—no regrind, no variability, no compromises.
Focused on Stock Shapes, Not Competing with You
We supply material, not finished parts so our focus remains on delivering machinable, high-quality stock while supporting our machine shop partners.
Common Delrin® AF machined components
Examples of parts typically manufactured from our Delrin® AF stock shapes.
Noise-reduction and motion-control parts
Ideal for applications where smooth motion and reduced noise are important design considerations.
Fixtures and moving supports
Machined for components that experience repeated movement and surface contact.
Conveyor and automation components
Used for rollers, guides, and supports in continuous-motion industrial systems.
Gears and sliding mechanisms
Suitable for precision gears and motion components requiring smooth, quiet operation.
Wear pads and guide rails
Applied in material handling and automation systems to reduce wear and noise during motion.
Bushings and bearings
Used in sliding and rotating applications where low friction and long wear life are required.
Delrin® AF grades available
Select from PTFE-filled acetal grades based on wear performance, friction requirements, and load conditions in sliding or rotating applications.
Delrin® AF DE588
Navy-certified 20% PTFE-fiber acetal combining extreme toughness, conformable sealing, and self-lubrication for high-load, high-shock naval and industrial applications.
Delrin® 100AF
High-viscosity acetal homopolymer with 20% PTFE fiber for maximum lubricity, extreme wear resistance, and dry-running performance in heavy-duty sliding applications.
.avif)
Delrin® AF Blend
A blend of Delrin® 100 AF and Delrin 100 Resins providing the sweet spot between low friction and mechanical toughness for industrial gears, guides, and sliding components.
.avif)
Delrin® AF13P
Economy-grade acetal with 13% PTFE powder for optimized friction reduction, smooth surface finish, and cost-effective self-lubrication in high-volume commercial applications.
Delrin® AF Grades Technical Comparison at a glance
General performance characteristics for Delrin® AF. Exact values vary by grade. Refer to individual grade pages for detailed specifications.
Exact performance values vary by grade.
Refer to the grade data sheets for detailed specifications.
Interact with Claudia to match your project needs with the perfect material solution. From tailored recommendations to in-depth product specs, Claudia provides the data-driven expert guidance you need to move from design to production.
Delrin® AF rods, plates, and tubular bars are available
Standard sizes supplied as extruded Delrin® AF rods, plates, and tubular bars. All Delrin AF stock shapes are produced under controlled conditions to support consistent machining, wear performance, and dimensional stability.
Rods
Available in diameters ranging from 3/8” to 8”, suited for machining bushings, bearings, gears, and other wear-critical motion components.
Plates
Available in standard thicknesses from 3/8” to 4”, ideal for machined wear pads, guide rails, sliding surfaces, and structural wear components.
Tubular bars
Available in outer diameters from 4” to 12” with wall thicknesses of 1” to 2”, helping reduce material cost and machining time for hollow components requiring low friction and stable performance.
Trusted by World's Leading Companies
Need help selecting the right Delrin® AF grade?
Share your application details, and our team will recommend suitable grades, shapes, and supporting data sheets.
Frequently Asked Questions
Delrin AF is a PTFE- fiber or powder filled homopolymer acetal material designed to reduce friction and improve wear resistance. Compared to standard Delrin, Delrin AF offers smoother sliding performance, longer wear life, and quieter operation in motion applications.
Delrin AF is typically chosen for sliding, rotating, and wear-critical components where low friction, smooth motion, and long service life are more important than high temperature or chemical resistance.
Quantum AEP provides several specialized Delrin grades tailored for specific friction and wear requirements:
- DE588: A naval-grade acetal developed for submarine components. It features 20% PTFE fibers and is uniquely conformable for sealing applications.
- 100AF / AF13: High-performance grades utilizing PTFE fibers (20% and 13% respectively) for superior lubricity in general dry-running environments.
- Delrin-PTFE 13P: A cost-effective solution using 13% PTFE powder to provide enhanced wear resistance and reduced friction for high-volume or light-duty applications.
Yes. Delrin AF machines cleanly and predictably using standard machining practices. It supports tight tolerances and consistent surface finishes, making it suitable for precision wear and motion components.
Quantum AEP supplies Delrin AF as extruded rods, plates, and tubular bars to support a wide range of machined wear and motion component designs.
In many applications, Delrin AF can operate without external lubrication due to its PTFE-filled formulation. However, lubrication requirements depend on load, speed, and operating conditions.
Delrin AF is commonly used for bushings, bearings, wear pads, guide rails, gears, conveyor components, and other parts requiring low friction and long-term wear resistance.